logo
down
shadow

GIT QUESTIONS

Getting a list of all children of a given commit
Getting a list of all children of a given commit
I think the issue was by ths following , well, "--branches" or "--all" will include all branch tips, and then "--not A" will exclude A and all its ancestry. However, "--branches --not A" will include branches that don't include A, which I think is no
TAG : git
Date : November 27 2020, 07:01 PM , By : user3863889
Accidentally committed dev database to Git
Accidentally committed dev database to Git
Hope this helps There's no need for fanciness with filter-branch - this is just in one recent commit. If not, simply remove the file (git rm --cached ) and amend your commit (git commit --amend). The --cached option tells git to only remove the copy
TAG : git
Date : November 26 2020, 07:01 PM , By : michal123
Git as a backup and Version Control System
Git as a backup and Version Control System
should help you out I wrote a blog post about this a while back:
TAG : git
Date : November 21 2020, 07:01 PM , By : Mike Smith
Cannot clone git from Azure DevOps using PAT
Cannot clone git from Azure DevOps using PAT
I wish this help you I've experienced the same issue, and spent quite a while searching for a solution. I finally came across this post which contained a solution in the comments section by Martinius79.In short, it was required to pass the username a
TAG : git
Date : November 20 2020, 07:00 PM , By : user5942929
Starting gitk on macOS gives an error application is not running
Starting gitk on macOS gives an error application is not running
I think the issue was by ths following , There is relevant information about this in an older issue: Applescript fails with error (-600) when launched over ssh on MavericksPeople has reported to solved this by either restarting the machine or killing
TAG : git
Date : November 20 2020, 07:00 PM , By : John Lee
How can I "git log" only code published to trunk?
How can I "git log" only code published to trunk?
will be helpful for those in need At my workplace we have a "master" trunk branch that represents published code. To make a change, I check out a working copy, create a topic branch, commit to the topic branch, merge the topic branch into master, and
TAG : git
Date : November 19 2020, 07:01 PM , By : Danacus
Makefile error: Unexpected end of line seen
Makefile error: Unexpected end of line seen
With these it helps Trying to install Git, I ran configure and make, but got the following error message: , Using gmake on SunOS instead of make fixed this issue for me.
TAG : git
Date : November 18 2020, 07:00 PM , By : Sasha Masko
How to do fetch and rebase?
How to do fetch and rebase?
Does that help Yes, that's exactly correct (though I'd simply git fetch or git fetch origin to have all of your local origin mirror updated, which also prevents issues with fairly old versions of Git).However, you can also simply do git pull --rebase
TAG : git
Date : November 17 2020, 07:01 PM , By : smv_m
Git : Failed at pushing to remote server, ' REPOSITORY_PATH ' is not a git command
Git : Failed at pushing to remote server, ' REPOSITORY_PATH ' is not a git command
like below fixes the issue I'm using Git with TortoiseGit on Windows XP, and I have a remote bare repository on Windows Vista 64bit version. , Solved!Run this command locally:
TAG : git
Date : November 17 2020, 07:01 PM , By : Steve Dias
Get the `id` of gitlab project via gitlab api or gitlab-cli
Get the `id` of gitlab project via gitlab api or gitlab-cli
I wish this helpful for you You can use the Get single project endpoint. But more generally, you are not limited to using the numerical ID, you can actually use the project name in API calls:id: The ID or URL-encoded path of the project
TAG : git
Date : November 14 2020, 07:01 PM , By : mpturner
list of all commits SHA1_HASH
list of all commits SHA1_HASH
this will help , Try git log --pretty=oneline.
TAG : git
Date : November 14 2020, 07:01 PM , By : Rango
Git-windows case sensitive file names not handled properly
Git-windows case sensitive file names not handled properly
help you fix your problem Windows is case-insensitive (more precisely, case-preserving). There is simply no possible way for two files to exist whose names only differ in case: two filenames which differ only in case are the same filename. Period.So,
TAG : git
Date : November 13 2020, 07:01 PM , By : Mayank Patel
Multiple Git repositories in one directory
Multiple Git repositories in one directory
seems to work fine A less annoying approach than git-submodules (which are a pain to use) is gitslave Gitslave creates a group of related repositories—a superproject repository and a number of slave repositories—all of which are concurrently develope
TAG : git
Date : November 12 2020, 07:00 PM , By : moody
How to see branch information?
How to see branch information?
wish helps you Branches do not have "parent" branches in git. Or equivalently, git does not keep track of what branch another branch was "created from". (In fact, a branch doesn't have to be "created from" another branch at all.)The only way that bra
TAG : git
Date : November 11 2020, 07:00 PM , By : Sandi Mac
Git checking out problem [fatal: early EOFs]
Git checking out problem [fatal: early EOFs]
may help you . What is the Git version are you using (Ubuntu 9.10 packages mentions 1.6.3)A recent thread reported a similar issue with Git1.7.1, although it was from a Cygwin environment.
TAG : git
Date : November 10 2020, 07:00 PM , By : R.Llama
Git merge command
Git merge command
this one helps. I am at a loss as to why an octopus merge would take place here (msysgit1.6.5 in a DOS session).An octopus is for one merge with several parents.
TAG : git
Date : November 10 2020, 07:00 PM , By : Mohammad Morovati
Can't commit in Git. Your branch is up to date with 'origin/master'
Can't commit in Git. Your branch is up to date with 'origin/master'
I think the issue was by ths following , I am really new to Git, and I faced this
TAG : git
Date : November 08 2020, 07:01 PM , By : klapec
Git Merge by file type
Git Merge by file type
To fix the issue you can do git checkout has options --ours and --theirs to get the respective versions during a merge. So you do something like
TAG : git
Date : November 08 2020, 07:01 PM , By : Israr Zaib
How can I show the contents of a file at a specific state of a git repo?
How can I show the contents of a file at a specific state of a git repo?
With these it helps It's probably problem with your path specification.This works, shows version of Makefile in commit b1b22df407417...
TAG : git
Date : November 08 2020, 07:01 PM , By : Ramakant
How to have current file in git but not history of file?
How to have current file in git but not history of file?
seems to work fine You're in core command territory here. You don't want history, you just want content, so use its content-tracker core. The only question is, how much do you want Git to do for you?The simplest procedurally is to simply tag the blob
TAG : git
Date : November 03 2020, 07:01 PM , By : Lucy Edwards
How do I pipe in FileMerge as a diff tool with git on OS X?
How do I pipe in FileMerge as a diff tool with git on OS X?
it helps some times Although it's not exactly the same as piping stdin into a script, you can do this:
TAG : git
Date : November 03 2020, 07:01 PM , By : user213468
If I run `git checkout -​- .` on branch. Is there any way I can get those files back?
If I run `git checkout -​- .` on branch. Is there any way I can get those files back?
I wish this helpful for you No, git did not write these file states anywhere in the scenario you describe.However, depending on your context, if you use an advanced enough editor it might have kept your local changes.
TAG : git
Date : November 02 2020, 07:01 PM , By : AProkhorenko
git checkout <branch> or <commit>
git checkout <branch> or <commit>
this will help You can to first fetch all remote branches (automatically including the one that has your desired commit) to your local:git fetch -a
TAG : git
Date : November 02 2020, 07:01 PM , By : Gaurav
Using Git with VB6
Using Git with VB6
Any of those help I found this solution to work in our situation. It adds a bit more to the previous answers and solved all of our MANY issues getting our project to work with git..gitattributes
TAG : git
Date : November 02 2020, 07:01 PM , By : user3855882
Git rebase and semi-tracked per-developer config files
Git rebase and semi-tracked per-developer config files
will be helpful for those in need The general idea behind config file is to only put under source control: a template of it, a script able to generate a proper config file based on local data (username, hostname, ip address, and so on)
TAG : git
Date : October 31 2020, 08:00 PM , By : Antonio
what does this git output mean?
what does this git output mean?
wish help you to fix your issue It probably means that you haven't pushed your local commits. Try running
TAG : git
Date : October 29 2020, 08:01 PM , By : Seokmin Song
Cloning a git repo on a Media Temple server
Cloning a git repo on a Media Temple server
hop of those help? It is probably similar to cloning on a Media Temple server a repo hosted on Unfundle (process for which you have a comprehensive guide here)The Media Temple part involves (supposing you already created the SSH keypair on your local
TAG : git
Date : October 28 2020, 08:00 PM , By : mianaomate
git: How to diff changed files versus previous versions after a pull?
git: How to diff changed files versus previous versions after a pull?
may help you . There are all kinds of wonderful ways to specify commits - see the specifying revisions section of man git-rev-parse for more details. In this case, you probably want:
TAG : git
Date : October 28 2020, 08:00 PM , By : mattischrome
What's the best way to manage a multi-user project on github?
What's the best way to manage a multi-user project on github?
Any of those help The admin view of the lead developer's repository will allow him to add the other developer's github account as one of possibly many collaborators (depends on your github plan, public repositories can have unlimited public collabora
TAG : git
Date : October 28 2020, 08:00 PM , By : puglove
How do I clone over HTTP a repository that has no info/refs?
How do I clone over HTTP a repository that has no info/refs?
it fixes the issue If you just want the source code to build and don't really need the repo, try adding --no-parent to wget. That should limit wget to the subtree.Apart from that, email the person who runs the repository and ask them to fix it.
TAG : git
Date : October 28 2020, 04:55 PM , By : John Moreno
Multiple url in ssh config file
Multiple url in ssh config file
hope this fix your issue When you have multiple ssh profiles you need to name them as a "Host".Your ~/.ssh/config will look something like this:
TAG : git
Date : October 25 2020, 07:10 PM , By : scgc
Remove first commit in repo
Remove first commit in repo
This might help you I hardcorded some credentials in the first commit of a repo, here is git log output: , I would squash first two commits (meld into a single commit)
TAG : git
Date : October 25 2020, 07:10 AM , By : Mãos À Obra
GitLab mirroring feature doesn't work when pulling from a remote repo
GitLab mirroring feature doesn't work when pulling from a remote repo
With these it helps We've opened gitlab-ce61624; should be addressed with this MR.
TAG : git
Date : October 23 2020, 06:10 AM , By : sunwell
Deploy Go Service in production with Docker
Deploy Go Service in production with Docker
may help you . There are two separate problems in your question, and I am not sure which ones you're looking for an answer for.Q1: What's a good way to create a Dockerfile for my Go project A1: Have a look at the example here: https://docs.docker.com
TAG : git
Date : October 22 2020, 06:10 AM , By : gvetto
How to recover deleted branch in github
How to recover deleted branch in github
may help you . One of your teammates accidentally deleted a branch, and has already pushed the changes to the central git repo. There are no other git repos, and none of your other teammates had a local copy. How would you recover this branch?
TAG : git
Date : October 20 2020, 06:10 PM , By : zeyd duran
Git : commit collision and commit rollback
Git : commit collision and commit rollback
Any of those help What you've done here is create a branch with the same name as an object. Git usually assumes that a 40-character hex name is an object ID, but in this case it's also a branch. It's confused, and so it told you that what you asked f
TAG : git
Date : October 20 2020, 06:10 AM , By : manju sai
What does "HEAD -> branch, origin/branch" mean in a git commit log?
What does "HEAD -> branch, origin/branch" mean in a git commit log?
I hope this helps you . The Pro Git book says:
TAG : git
Date : October 19 2020, 06:10 AM , By : A Modern Failure
How do I achieve/setup GitFlow in AzureDevOps repos with PR branch policies on master and develop?
How do I achieve/setup GitFlow in AzureDevOps repos with PR branch policies on master and develop?
To fix the issue you can do In our standards meeting at my organization, your question came up just the other day. After looking into it for a few hours, my best answer is that GitFlow is not going to be compatible with all the extras Azure DevOps pr
TAG : git
Date : October 18 2020, 06:10 AM , By : Egor Bushmelev
Jenkins workspace location
Jenkins workspace location
hope this fix your issue When you run a Jenkins job with Git SCM, the Git repository will be cloned inside the job specific workspace, which can be found at ${JENKINS_HOME}/workspace/${JOB_NAME}
TAG : git
Date : October 17 2020, 06:10 PM , By : Swapnil Shinde IT HO
Delete/reset master branch
Delete/reset master branch
around this issue When you want to clear the masters branch, why you dont create a new empty repository, then push it to your remote: git init git commit -m "Initial commit" git add remote git push --force on your masters branch
TAG : git
Date : October 17 2020, 06:10 AM , By : roja
Git appears to use incorrect ancestor as base when merging
Git appears to use incorrect ancestor as base when merging
Hope this helps I've been trying to work out if I can force a common ancestor for the merge to work from, but I'm not sure I can do this from what I've read.
TAG : git
Date : October 15 2020, 06:10 PM , By : Abdus Subhan
Git: revert merge commit, but save save subsequent commits(after removed merge commit)
Git: revert merge commit, but save save subsequent commits(after removed merge commit)
wish help you to fix your issue If you have no problem rewriting history, get rid of the merge in history and replay history after it. Let's call that revision merge-rev
TAG : git
Date : October 14 2020, 06:10 PM , By : Andras Pulai
How to pull changes from a pull request thats already checkout?
How to pull changes from a pull request thats already checkout?
this will help Pull requests are features of online repos (like Github) that basically mean "this person wants to merge these changes from this branch to that branch". It is NOT an actual branch, rather it presents the changes from someone's branch,
TAG : git
Date : October 14 2020, 02:00 PM , By : THE ANKIT VERMA
I am trying to push my files code into GitHub but it is not working
I am trying to push my files code into GitHub but it is not working
fixed the issue. Will look into that further Do a git pull to grab the latest changes from the server. Resolve any merge conflicts. Commit any merge conflict changes. git push your changes back up.
TAG : git
Date : October 14 2020, 03:00 AM , By : JuhoMikael
Why does my git log graph grow one more line after I merge a branch each time?
Why does my git log graph grow one more line after I merge a branch each time?
This might help you That is why squash and rebase do exists (for local commits of develop you have not pushed yet).That would help keep the history linear, instead of git log showing you each develop merge in its separate track.
TAG : git
Date : October 14 2020, 03:00 AM , By : arshadali5695
Git push failed with error: “GitLab: Author not member of team”
Git push failed with error: “GitLab: Author not member of team”
hop of those help? It's not git push that's using your username + hostname, it's git commit.By default, if you did not set user.name and user.email BEFORE making a commit, git will get it from your computer name and hostname. It would also have shown
TAG : git
Date : October 14 2020, 03:00 AM , By : Dudu Ben Simon
Is there a name for gitignore's search pattern
Is there a name for gitignore's search pattern
To fix the issue you can do Another formal documentation of these rules are in the git-scm docs. I think the closest thing that .gitignore resembles is glob pattern matching which they mention in some of the documentation:
TAG : git
Date : October 14 2020, 03:00 AM , By : Javier Goitia
How to stash WIP changes at origin?
How to stash WIP changes at origin?
this one helps. In git, we don't have stash that gets stored on remote. Instead, we use branches to do the job. Branch creation in git is very cheap operation unlike some VCS like TFS.If you are on develop and have some work in progress, you can just
TAG : git
Date : October 14 2020, 02:00 AM , By : sergio
How to Create SSH Key in git
How to Create SSH Key in git
With these it helps Create your ssh key using ssh-keygen -o -t rsa -b 4096 -C "email@example.com"After list file in folder ~./ssh and see if your key exist. Use:
TAG : git
Date : October 14 2020, 01:00 AM , By : Aleksandrs Jasinskis
Creating bitbucket repository using Git bash
Creating bitbucket repository using Git bash
it should still fix some issue I am trying to create a bitbucket repository through git bash and I am suing Curl command as below: , You can try using bitbucket-cli.First, install it using pip
TAG : git
Date : October 14 2020, 12:00 AM , By : FIXEDENTROPY
Deleting Resource from Kubernetes Using Weaveworks Flux
Deleting Resource from Kubernetes Using Weaveworks Flux
To fix the issue you can do Flux has an experimental (but quite mature) garbage collection feature that can be enabled by setting the --sync-garbage-collection flag as an argument on the Flux daemon deployment (or by setting syncGarbageCollection.ena
TAG : git
Date : October 13 2020, 08:00 PM , By : Eric Nival
Jenkins MultiBranch Pipeline git config error
Jenkins MultiBranch Pipeline git config error
I wish this helpful for you Had the same problem: Go to $JENKINS_HOME/caches (on windows it is probably C:\Program Files (x86)\Jenkins\caches) - You will find a few caches, each has .git/config file Read the .git/config until you find the one whose [
TAG : git
Date : October 13 2020, 07:00 PM , By : willy legaspi
Branch removal from history
Branch removal from history
With these it helps A branch is just a pointer to a commit, so if Task2 is ahead or at the same level of Task1, you can just delete Task1:
TAG : git
Date : October 13 2020, 06:00 PM , By : Agniv Debsikdar
Should I open a new repository on GitHub or simply branch?
Should I open a new repository on GitHub or simply branch?
it should still fix some issue You have two options as of now, you can either fork it or you can make a branch. I would suggest that you fork it and start working on it rather than creating a branch as you want to keep two entities of the code separa
TAG : git
Date : October 13 2020, 06:00 PM , By : Zahid Hasan
git checkout will not remove staged files that were never committed
git checkout will not remove staged files that were never committed
it fixes the issue It is expected behaviour. If I had to describe it (and anyone is welcome to dispute my explanation), I would say that because your newfile.txt has not yet been checked in and nothing in the master branch is associated with newfile.
TAG : git
Date : October 13 2020, 04:00 PM , By : Santosh Maharana
Switch submodule URL with different commits results in "not a tree"
Switch submodule URL with different commits results in "not a tree"
I hope this helps you . I need to switch a submodule of a project with one I created. The new submodule is in a repo I own. , Where is that commit pointer stored ...
TAG : git
Date : October 13 2020, 03:00 PM , By : Abhi
Is it possible to push code into bitbucket into a non-existent repository?
Is it possible to push code into bitbucket into a non-existent repository?
should help you out Since a repository must be created before, you could script that creation, using the BitBucket Could API /2.0/repositories/{username}/{repo_slug} (a BitBucket server has a different API)That way, your script could loop on your loc
TAG : git
Date : October 13 2020, 01:00 PM , By : user6024916
git is not detecting changed files
git is not detecting changed files
this one helps. The possible reasons are: git update-index was used to set assume-unchanged or skip-worktree (check it here) your files are part of a nested git repo (there is a .git somewhere in your subfolders) your files are part of a submodule (c
TAG : git
Date : October 13 2020, 10:00 AM , By : Joyce
Remove extraneous commits from a git repository
Remove extraneous commits from a git repository
wish helps you The other thing that can cause git gc to not delete a commit is if there are tags referring to it or the chain which contains it.
TAG : git
Date : October 13 2020, 10:00 AM , By : tuannh
git batch rename bulk of commited files
git batch rename bulk of commited files
it fixes the issue For maximum CPU efficiency, Git's core update-index command can take bulk updates on stdin:
TAG : git
Date : October 13 2020, 10:00 AM , By : prajwal

shadow
Privacy Policy - Terms - Contact Us © 35dp-dentalpractice.co.uk