logo
down
shadow

DEVELOPMENT QUESTIONS

Aerospike Error while receiving on FD: 11 (Resource temporarily unavailable)
Aerospike Error while receiving on FD: 11 (Resource temporarily unavailable)
help you fix your problem I wouldn't necessarily worry if this is only logged at Debug level and there is no noticeable impact, but I am not certain... could be simply how epol works under aggressive workloads.Cross posted on https://discuss.aerospik
TAG : development
Date : September 12 2020, 07:00 AM , By : Rakesh Pati
Generating address of a instruction using Code Segment and Instruction Pointer
Generating address of a instruction using Code Segment and Instruction Pointer
I wish did fix the issue. Consider the Code Segment Address to be FE00 and Instruction Pointer to be ABBE. How do we represent the generated address?
TAG : development
Date : September 12 2020, 07:00 AM , By : Shivindera Singh
Lotus Notes Designer - Show dialog list based on value from another field
Lotus Notes Designer - Show dialog list based on value from another field
I think the issue was by ths following , First of all: You need to set the setting "Refresh Choices on Document refresh" in the "Process" Field (same Tab as the Formula) and the setting "Refresh fields on keyword change" in the Assy- field. I usually
TAG : development
Date : September 12 2020, 04:00 AM , By : noob9527
Explain Offline Token validation vs Online Token validation in Open ID connect ? Advantages, limitations & tradeoffs
Explain Offline Token validation vs Online Token validation in Open ID connect ? Advantages, limitations & tradeoffs
hope this fix your issue The only advantage of online validation is the possibility that user rights are revoked in the meantime. With offline validation you have proof that token is issued by your Keycloak and that nobody tampered it. Online validat
TAG : development
Date : September 12 2020, 03:00 AM , By : Tash
FreeRTOS + GNAT Ada compiled library
FreeRTOS + GNAT Ada compiled library
To fix the issue you can do You’re proposing to use the GNAT CE 2019 arm-elf compiler to compile the Ada source (-mcpu=cortex-a9 is OK) link the result with your non-ada code.I don’t think you could use the AdaCore Ravenscar runtimes that come with
TAG : development
Date : September 12 2020, 12:00 AM , By : Nick
SAP/ABAP-periodic functions
SAP/ABAP-periodic functions
help you fix your problem Use transaction Schedule Background Job (SM36) to create and schedule your own recurring job. The blog Scheduling a New Job in SAP gives you an overview of the steps you need to take. You basically create an ABAP program (e.
TAG : development
Date : September 11 2020, 11:00 PM , By : Zak
Plug-in my backend API to leverage only Gooddata UI Components
Plug-in my backend API to leverage only Gooddata UI Components
Hope this helps Disclaimer: I am currently one of the developers working on GoodData.UI.While the scenario you are suggesting is technically possible, it is not something we actively support at this time. The main purpose of GoodData.UI is to allow t
TAG : development
Date : September 11 2020, 10:00 PM , By : Putra Liowono
IBM MQ queues files rolling over policy
IBM MQ queues files rolling over policy
this will help That's not how the queue files work. They are not rollover logs. The same space is continually overwritten as needed to store messages, but messages may not be written there at all if they can be processed through memory caches etc.PER
TAG : development
Date : September 11 2020, 09:00 PM , By : Applecookie
How to handle "Couldn't get any response" in mule?
How to handle "Couldn't get any response" in mule?
it should still fix some issue HTTP:NOT FOUND means that the server returned an HTTP 404 (ie not found) response. If the server aborted the response for any reason it is not expected that the HTTP Requester to return a NOT FOUND. Having said that, th
TAG : development
Date : September 11 2020, 08:00 PM , By : EANTI GROUP
How do you get code to execute at the end of a procedure?
How do you get code to execute at the end of a procedure?
help you fix your problem If I understand the question, you want to disconnect from another AppServer once the work is done. Would try something along the lines of the below work?
TAG : development
Date : September 11 2020, 07:00 AM , By : Thinh Tồ
Tensorflow 2 on Google Cloud AI platform
Tensorflow 2 on Google Cloud AI platform
Any of those help we will support TF 2.1 officially in early Feb due to large corresponding changes on service. Thank you for your patience!
TAG : development
Date : September 11 2020, 06:00 AM , By : Syde Saufi
Flink Auto generated UIDs have been disabled but no UID or hash has been assigned to operator Partition
Flink Auto generated UIDs have been disabled but no UID or hash has been assigned to operator Partition
Hope that helps This is a bug -- see FLINK-14910. This will be fixed in 1.9.2 and 1.10.0.As a workaround you could do
TAG : development
Date : September 11 2020, 01:00 AM , By : John
Is Google Dialogflow available in Hungarian?
Is Google Dialogflow available in Hungarian?
I wish did fix the issue. As per https://cloud.google.com/dialogflow/docs/reference/language, Hungarian is not mentioned as the supported languages of Dialogflow. However, Dialogflow should be able to perform the same NLP processes on Hungarian as we
TAG : development
Date : September 10 2020, 09:00 PM , By : FlySky G
Graphviz: Flat horizontal graph with arching edges?
Graphviz: Flat horizontal graph with arching edges?
Hope this helps You need to tell graphviz first that you want to have the nodes in a row. Only then you can introduce a second set of edges the way you like. There is very limited control as to how graphviz places the edges; Trial and error brought m
TAG : development
Date : September 10 2020, 07:00 PM , By : bonyuri
Check if file exists in artifactory without downloading
Check if file exists in artifactory without downloading
Hope this helps You could check the status code returned when getting the file info, not the file itself. See the documentation of this REST API.
TAG : development
Date : September 10 2020, 03:00 PM , By : Marci
DocuSign API method envelopes.listStatusChanges doesn't show envelopes shared to my user
DocuSign API method envelopes.listStatusChanges doesn't show envelopes shared to my user
should help you out If you know other user's userId then you can use below API call to see that user's shared envelopes. You must specifically call that out in the request through the user_id parameter, and only one other user can be queried for per
TAG : development
Date : September 10 2020, 01:00 PM , By : krishna bashyal
IA32 vs MSR prefix for x86 MSR names
IA32 vs MSR prefix for x86 MSR names
I think the issue was by ths following , Some MSR registers are architectural, meaning that they are guaranteed to be supported on all future processors (and the defined bit fields would have the same meaning in the future). Section 2.1 of the Intel
TAG : development
Date : September 10 2020, 10:00 AM , By : Andre Hall
Making SMS verification codes easily copyable
Making SMS verification codes easily copyable
I hope this helps . As of February 2020, there appears to be no standardized format for SMS 2FA codes. There is currently a proposal from an engineer at Apple to create a unified format for SMS delivery.I have found that iPhone is good at picking up
TAG : development
Date : September 10 2020, 07:00 AM , By : KDorski
Significance of Constraints in Snowflake
Significance of Constraints in Snowflake
wish helps you They express intent, helping people understand your data models. Data modeling tools can use them to generate diagrams. You can also programmatically access them to validate data integrity yourself.
TAG : development
Date : September 10 2020, 07:00 AM , By : Dev LGI
How to aggregate data from another cube in cubejs?
How to aggregate data from another cube in cubejs?
it should still fix some issue Campaign has many SentMessages and if joined to calculate Campaign.messageSentCount this calculation results might be affected. There's a simple check that ensures there're no hasMany cubes referenced inside aggregation
TAG : development
Date : September 10 2020, 04:00 AM , By : vijay
SQL builder for CockroachDb
SQL builder for CockroachDb
I wish this help you PM at Cockroach here. We are working with the team at jOOQ to provide a CockroachDB support in the next few months. In the meantime, you can use pgjdbc with something like JDBI to do query bindings. We are also working on a Cockr
TAG : development
Date : September 10 2020, 02:00 AM , By : mohit
Databinding memory leaking
Databinding memory leaking
I hope this helps . It can be memory leak in given scenario:Let's say you click on view and this method viewModel.showList(v) get invoked along with view reference passed to it.
TAG : development
Date : September 09 2020, 08:00 PM , By : ABDUL GHAFFAR
How we can get local path of documents in MarkLogic
How we can get local path of documents in MarkLogic
this will help When documents are ingested into a MarkLogic database they are stored in a proprietary binary format, along with its index entries, on disk in one of the of the forests associated with that database.The default location on Windows for
TAG : development
Date : September 09 2020, 07:00 PM , By : sahil
How to edit global attributes in netcdf file with NCO
How to edit global attributes in netcdf file with NCO
should help you out It is a global attribute and the syntax you invoked will only change the attribute for all variable attributes of that name, not global attributes. Read the docs on that point and try
TAG : development
Date : September 09 2020, 06:00 PM , By : Melas
Reminders - DDD
Reminders - DDD
I wish this helpful for you Sending a Reminder is a Service. The fact that a Reminder was sent can be captured as a DomainEvent, but the actual sending of a Reminder is either an ApplicationService or DomainService depending of your application.The S
TAG : development
Date : September 09 2020, 03:00 PM , By : Hans Van Daele
Multi data center for Clickhouse
Multi data center for Clickhouse
like below fixes the issue CH is multi-master only.CH is multi / geo DC out the box. There are many users with cross-ocean DCs.
TAG : development
Date : September 09 2020, 01:00 PM , By : Aravind
How to plot band structure?
How to plot band structure?
I hope this helps you . Although there isn't a direct plot function, the band structure can be plot using the eigenvalue matrix
TAG : development
Date : September 09 2020, 11:00 AM , By : hellmantica
Quarkus extensions nediness
Quarkus extensions nediness
hope this fix your issue It's using Hibernate ORM under the hood.Extensions are there for several reasons:
TAG : development
Date : September 09 2020, 08:00 AM , By : user51126
How to use run keyword if on robot framework
How to use run keyword if on robot framework
this will help Although your script contains a list comparison, when looking a little closer it seems to me that this is not a list comparison, but a value comparison which should result in a message like
TAG : development
Date : September 09 2020, 07:00 AM , By : JABvzla
Unix timestamp: everywhere the same?
Unix timestamp: everywhere the same?
wish helps you Unix timestamps are the number of seconds elapsed since 01-01-1970 00:00:00 UTC so if the system time is set correctly it should be equal everywhere.
TAG : development
Date : September 09 2020, 12:00 AM , By : N. J. Stewart
Java JUnit JVM_EnqueueOperation() stubbed
Java JUnit JVM_EnqueueOperation() stubbed
To fix the issue you can do Seems like the unit test uses PowerMock, which does not currently support IBM JDK.PowerMock tries to load an agent via HotSpot Attach Mechanism, but it should use J9 attach mechanism instead.
TAG : development
Date : September 08 2020, 10:00 PM , By : maisonam
Crowdsourcing - Snowflake differentiators from Azure's DW offering
Crowdsourcing - Snowflake differentiators from Azure's DW offering
it helps some times What I've found so far: SF = Snowflake Sy = Azure Synapse Only one setting per DB for compute power on Sy, while SF allows
TAG : development
Date : September 08 2020, 07:00 PM , By : Damian Ivanovic
How will an event without a year indicator be indexed?
How will an event without a year indicator be indexed?
This might help you Yes, Splunk will use the current year if one is not specified. Just put TIME_FORMAT = %b %d %H:%M:%S.%3N in your props.conf file.There's no danger of collision.
TAG : development
Date : September 08 2020, 07:00 PM , By : Nathan Roode
Sandbox for Dynamics 365
Sandbox for Dynamics 365
will help you Dynamics 365 purely works on licensing model short trial period for prospect try-outs. Without license the show cannot run for long time, even for learning purpose. Forget about a year long free try-outs (or learning environment), the
TAG : development
Date : September 08 2020, 07:00 PM , By : manjunath n
how to ask turtle move to the nearest patche with the same category?
how to ask turtle move to the nearest patche with the same category?
wish of those help If I have interpreted your question correctly, the patch variable named 'category' takes the values of "school", "supermarket" and potentially other options. What you want is to restrict the choice to patches with the same category
TAG : development
Date : September 08 2020, 05:00 PM , By : alshaimaa murshed
who is responsible for jwt token verification?
who is responsible for jwt token verification?
I think the issue was by ths following , It all depend's on how you are using validating token. Methods used for validating token Introspection
TAG : development
Date : September 08 2020, 03:00 PM , By : Wesley Boon
How to obtain first item from first vector in a set of vectors?
How to obtain first item from first vector in a set of vectors?
will be helpful for those in need The default clojure set is unordered, so calling first on them doesn't really make sense (unless you know for sure it's a set of 1 element). It does make sense if it's a sorted set. What you have done would be the id
TAG : development
Date : September 08 2020, 01:00 PM , By : Chris Scoular
Some way to count elements in a property in gremlin?
Some way to count elements in a property in gremlin?
This might help you Hi I have a node that represents an email, and one of the properties is the recipients (e.g. { 'john@doe.com', 'max@example.com' }. Is there a way that I can count how many recipients each email has? , So assuming:
TAG : development
Date : September 08 2020, 11:00 AM , By : Nutiler
How to iterate thru all google cloud kms keys in an organization without running into read quotas?
How to iterate thru all google cloud kms keys in an organization without running into read quotas?
it should still fix some issue Is cloud asset inventory an option? You could run something like
TAG : development
Date : September 08 2020, 07:00 AM , By : Guanhao Chan
Set tooltip hint for `Select` widget in Vaadin Flow 14
Set tooltip hint for `Select` widget in Vaadin Flow 14
around this issue You have access to the DOM basically and can directly add a title attribute. E.g.
TAG : development
Date : September 08 2020, 06:00 AM , By : singhalakash
How to enforce a MFA session expiry after 24 hours
How to enforce a MFA session expiry after 24 hours
I think the issue was by ths following , For remembered devices, you should be able to configure the Days before a device must re-authenticate. This option lets users who have successfully authenticated through multi-factor authentication avoid futur
TAG : development
Date : September 08 2020, 04:00 AM , By : user6098040
I cannot seem to create a DFA for this language
I cannot seem to create a DFA for this language
I wish this help you By the Myhill-Nerode theorem, the states are: Already matched 'baba' (accepting state) Immediately after 'bab', and haven't matched 'baba' Immediately after 'ba', and haven't matched 'baba' Immediately after 'b', and none of the
TAG : development
Date : September 07 2020, 10:00 PM , By : Proma Raha
Cannot get nextcloud listening on port 82
Cannot get nextcloud listening on port 82
hop of those help? From the snap source, it seems apache is set up to listen on IPv4-mapped IPv6 socket:
TAG : development
Date : September 07 2020, 05:00 PM , By : Liam Duxbury
How to add a contact to contactgroup using Kentico Rest API?
How to add a contact to contactgroup using Kentico Rest API?
I hope this helps . In Kentico contact membership in a contact group is stored in om.contactgroupmembercontact object type. So I believe the following should work:POST request to URL: ~/rest/om.contactgroupmembercontact?format=json
TAG : development
Date : September 07 2020, 01:00 PM , By : KBTunis
Conditional Tagging based on a criteria
Conditional Tagging based on a criteria
This might help you The following expression is true when there is at least one record with category A and at least one record with a category other than A: max([category]=“A”) and max([category]“A”)For example, if you put customer on rows and the ab
TAG : development
Date : September 07 2020, 12:00 PM , By : Raphael Malik
Typo3 backend mapping from tt_content.php to ext_tables.sql
Typo3 backend mapping from tt_content.php to ext_tables.sql
I think the issue was by ths following , If an extension is already installed, TYPO3 does not know if new columns have been defined and we have to do it manually.TYPO3 v9
TAG : development
Date : September 07 2020, 08:00 AM , By : Ei Thandar
Getting settings from backend configuration in TYPO3
Getting settings from backend configuration in TYPO3
Hope this helps When you use the settings. prefix in your plugin's FlexForm you can access them via $this->settings in the Extbase controller just as you would access TypoScript plugin settings. FlexForm settings get overlaid onto TypoScript's tx_xxx
TAG : development
Date : September 07 2020, 02:00 AM , By : PoppingSugar
Removing Individual Post Pages from Jekyll
Removing Individual Post Pages from Jekyll
should help you out I resolved the issue by moving all the posts to a collection and switching output to false. This is the new line in my _config.yaml
TAG : development
Date : September 06 2020, 04:00 PM , By : jiahong xie
Varnishstat -1 not show avg
Varnishstat -1 not show avg
Hope that helps Varnish only keeps current values of counters and gauges. Average columns are explicitly computed by the varnishstat tool when opened in 'curses mode'. If you close and reopen varnishstat calculation will start again. Therefore varnis
TAG : development
Date : September 06 2020, 03:00 PM , By : Song YaPeng
Exact criterion for implicit synchronization in CUDA
Exact criterion for implicit synchronization in CUDA
With these it helps If I understand correctly - the wording refers to the times at which the commands are scheduled, i.e. "if you scheduled some command C triggering implicit synchro after scheduling other things - everything you've scheduled before
TAG : development
Date : September 06 2020, 02:00 PM , By : Andrei
Perforce - Receiving error "Can't update committed change" when trying to append to change list description
Perforce - Receiving error "Can't update committed change" when trying to append to change list description
around this issue If you own the change, you can update the description with the change -u flag. (You need the change -f command to update other people's changes, or to update fields other than the description.)If you're doing this as a normal human
TAG : development
Date : September 06 2020, 06:00 AM , By : Programmer1987
Iterate through variables in Robot Framework Click Element
Iterate through variables in Robot Framework Click Element
it fixes the issue The error message still does not seem to fit the snippet, I believe.But anyway: with @{TESTBOTS} you unwrap the complete list. I would have expect an error like No element found with text 'Bot1 Bot2 Botx'
TAG : development
Date : September 06 2020, 06:00 AM , By : Pradeep Kara
How to wait 1 second using Structured Text?
How to wait 1 second using Structured Text?
this one helps. Schneider Electric's EcoStruxure Machine Expert is CoDeSys based. So you have a few options. Use BLINK in Util library
TAG : development
Date : September 06 2020, 03:00 AM , By : durga
Why does pymc3 run even when I don't include any observations?
Why does pymc3 run even when I don't include any observations?
it helps some times Yes, you're just sampling from the prior. If you want to, you can check that by plotting the samples as histogram or kernel density estimate and compare it to the pdf you get from scipy.stats.gamma.
TAG : development
Date : September 06 2020, 12:00 AM , By : vivek nimbarmunde
Duplicate values in Julia with Function
Duplicate values in Julia with Function
seems to work fine You need to vectorize the division operator with a dot .. Additionally I understand that you want results to be Int - you can vectorizing casting to Int too:
TAG : development
Date : September 05 2020, 09:00 PM , By : LuMac
How do I pass double quotes on the parameter string in Inno Setup?
How do I pass double quotes on the parameter string in Inno Setup?
should help you out Quotes can be embedded; just double them. Also, if you intend to use the cmd.exe move command, you would need the /c parameter. You might also consider using /y or as a parameter for the move command (depending on your needs).
TAG : development
Date : September 05 2020, 08:00 PM , By : Fernando Lopez
How to make a Google Home (Mini) publish what it listens to a MQTT topic (and broker)?
How to make a Google Home (Mini) publish what it listens to a MQTT topic (and broker)?
Hope this helps The short answer to this is you don't (as you've described it).The slightly longer answer is that you first have to move the arrow you are interested into to the cloud and it's not a MQTT message.
TAG : development
Date : September 05 2020, 07:00 PM , By : Momo
Postman - execute the first request for the first iteration only with multiple requests * multiple iterations
Postman - execute the first request for the first iteration only with multiple requests * multiple iterations
it fixes the issue You can try the solution below to see if this solves your problem. Create that long life token or whatever you wanna do once in preRequest script of request B and saves that long life token in environment variables or in general yo
TAG : development
Date : September 05 2020, 06:00 PM , By : Chakradhar Thallapak
What is the performance of log(n!) compared to n?
What is the performance of log(n!) compared to n?
I wish this helpful for you Stirling's approximation implies that log(n!) = Θ(n log(n)). In particular, it is not true that log(n!) = O(n), and it is true that n = O(log(n!)).
TAG : development
Date : September 05 2020, 05:00 PM , By : theotheroneofem
How to use pytorch to construct multi-task DNN, e.g., for more than 100 tasks?
How to use pytorch to construct multi-task DNN, e.g., for more than 100 tasks?
will be helpful for those in need You can (and should) use nn containers such as nn.ModuleList or nn.ModuleDict to manage arbitrary number of sub-modules.For example (using nn.ModuleList):
TAG : development
Date : September 05 2020, 01:00 PM , By : Min Yan

shadow
Privacy Policy - Terms - Contact Us © 35dp-dentalpractice.co.uk